認(rèn) 證：工商信息已核實
訪問量：720667
桂林礦山設(shè)備有限公司 2025-03-31 點擊87次
Raymond mill is mainly used for grinding and fine powder treatment of powdery materials, suitable for a variety of non-combustible and non-explosive ores, building materials, metallurgy, chemical and other industries. Its working principle is to grind the material to the required fineness through the mutual friction and grinding of the roller and the grinding ring.
When the temperature of Raymond mill is too high, the following measures can be taken to deal with it:
Check the feeding condition: ensure that the feeding is uniform and appropriate. If the feed is too much or uneven, it may lead to an increase in the thickness of the material layer in the mill, resulting in an increase in temperature. Adjust the feed amount and uniformity appropriately to maintain proper working condition.
Check the fan and exhaust system: Ensure that the fan and exhaust system work properly. The normal operation of the fan can help heat dissipation and reduce the temperature of the mill. Check whether the fan is working normally, and clean up the ash and blockage in the exhaust system.Check the cooling system: Make sure the cooling system is working properly. Raymond mills are usually equipped with cooling systems to reduce the temperature of the equipment. Check the supply of cooling water or cooling air system to ensure that it is working well.
Check the lubrication system: Make sure the lubrication system is working properly. The lubrication system of the mill is very important to reduce the temperature of the equipment. Check the supply of lubricating oil to the lubrication system and ensure that the lubricating oil is clean and adequate.
Reduce the load of the mill: if the temperature continues to rise, the load of the mill can be appropriately reduced and the working intensity of the equipment can be reduced to reduce the temperature rise.Stop maintenance: If the above measures can not solve the problem of high temperature, it is recommended to stop maintenance. The temperature may be too high due to equipment faults or parts wear, and professional technicians are required to repair and repair the equipment.
Please note that when dealing with the problem of overtemperature of the equipment, it is important to ensure your own safety and follow the relevant operating procedures. If the problem cannot be solved or there is a serious fault, it is recommended to seek the help of professional maintenance personnel.
If you have any interest or other inquiries, please contact me on WhatsApp: 13677868426