天天日夜夜,久久老女人,人人爱国产,91视频青青草

The RS 2500 is our Very High Dose Rate， Small Volume x-ray irradiator that utilizes MULTIPLE 4pi emitters to achieve dose rates up to 120 Gy/min to a 500mL canister (@ density 1) with our standard configuration. Additional emitters can be added. The RS 2500 is custom built for each application and we welcome your inquiries. The RS 2500 can be used for onsite terminal sterilization of small lots depending on density and product size.

Minimum/maximum ratios can be held very close to one. While individual product validation is required， typical cycles would be less than 3.5 hours. Can be used for inactivation of virulent bacteria or virus samples before handling or final disposition.

Applications：

Radiation Effects on Electronics/Materials

Sterilization

Polymer

Recombination

· Cross-linkage

Chain scission

Space Studies

Food Processing

Plant Mutation

Virus Inactivation

Other Forms of Research

Features and Benefits：Just-In-Time supply· management helps to control costs

Safe， the unit is self-shielded with· no radioactive source

Secure， system is password protected·

Turn-key· installation

Easy to operate using a simple， easy-to-read

Service and Support – 12 month full warranty and a 24 month X-ray tube warranty 5SAP – 5-year Source Assurance Program eligible·

Does not· require a US Nuclear Regulatory

Commission (NRC) license

Industry· accepted ISO 11137:2006 and EN 552

Technical Specifications*：Dose Rate: 6.6 kGy/h (0.66 Mrad/h)

Beam· Uniformity: Better than ± 7%

Number of Canisters: 1 per cycle or up to 4· vial holders

Processing Canisters: Diameter 3”(7.62cm) to 7”(17.78cm)，· height 8”(20.32cm)

Cabinet Dimensions: Length 82”(209cm)， Width· 33”(84cm)， Height 51”(130cm)

Cabinet Weight: Net 5439 lbs(2467 kg)

Power Requirements: US 208 VAC， European 400VAC

Cooling system with high· capacity water to air heat exchanger (external unit)

Dual 4pi Au Target· Emitters (capable of adding an additional 2， 4pi Target Emitters)

* Technical specifications are subject to change， please contact your Rad Source representative for the most current information.