參考價格
面議型號
100184品牌
先豐納米產地
江蘇樣本
暫無品級:
一級制作方法:
.質量標準:
.純度:
99.%目數:
0.4-1微米看了Graphene Supermarket二硫化鎢微片的用戶又看了
虛擬號將在 180 秒后失效
使用微信掃碼撥號
號 | CAS號 | 編號 | 包裝 | 參數 |
100184 | 12138-09-9 | XF061 | 100g | 純度99% 粒徑范圍:0.4-1微米 |
平均粒徑范圍:0.4-1微米
純度> 99%
Average Particle Size: 0.4-1 microns
Purity: 99%
WS2 Micropowder is useful for creating WS2 solutions with applications ranging from electronics to energy storage. The powder may be sonicated in a range of liquid solvents, whereas the longer sonication takes place, the smaller the flake size in solution. Further, before sonication the solution will be silvery, and after it will turn a greenish-yellow. The solvents useful during sonication include benzyl benzoate, isopropanol, acetone, methanol, and many others.
The liquid dispersion may then be used to create a thin film on the substrate of your choosing. These thin-films have a range of applications, such as transistors, solar cells, and energy storage devices.
WS2 solution can also be used in composite materials.
The difference between our micropowders and ultrafine powders are their flake sizes. Ultrafine powders have smaller flakes, and create dispersions with smaller particle sizes after sonication than micropowder. Micropowders require more sonication and will result in flakes with larger lateral dimensions. Micropowder is a low-cost alternative to our ultrafine powder.
Transparent and Flexible Electronics
Transistors
Composite Materials
Chemical and bio-sensors
Semiconductor printable inks
Electrical Characteristics of Molybdenum Disulfide Flakes Produced by Liquid Exfoliation, Lee et al. Adv. Mater. 2011, 23, pp. 4178-4182
Gelatin-assisted fabrication of water-dispersible graphene and its inorganic analogues, Ge et al. J. Mater. Chem. 2012, 22, pp. 17619-17624
Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size, O.Neill et al. Chem. Mater. 2012, 24, pp. 2414-2421
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials, Coleman et al. Science, 2011, 331, pp. 568-571
暫無數據!
評論人:上海大學 宋永騰文章內容概述骨缺損修復是一個復雜的多階段生理過程,涉及早期血管生成和后期成骨的耦合,且常因感染而變得復雜,因此該過程仍然是一個重大的臨床難題。盡管功能性載藥工程支架有望解決這一
為了使石墨烯材料獲得更加廣泛的應用,功能化改性處理一直都被作為一個研究熱點而被廣泛深入研究。氮原子摻雜是一種既能保持納米石墨烯π體系完整性,同時又能顯著調控其物理化學性質的有效策略。氮原子具有比其它無
單原子催化在過去十年中引起了廣泛關注。由于其獨特的活性位點結構,單原子催化在熱催化、電催化和環境催化等許多體系中表現出超高的原子利用效率和獨特的催化活性和選擇性。本期小豐整理了3篇單原子催化劑近期發表
石墨烯因其優異的電學、機械和熱學性能,自發現以來便備受學術界和工業界的關注。經過20多年的研究與發展,石墨烯仍然是人們關注的明星材料。特別是進入2025年5月以來,Nature、Science已連續報